LinceCAD SNAPISOPAIR
Type: integer · Stored in: drawing · Initial value: 0
Current isometric plane, the one followed by ortho, the grid, snap and the crosshairs when isometric drafting is on.
| Value | Plane |
|---|---|
| 0 | Left (axes at 90° and 150°) |
| 1 | Top (axes at 30° and 150°) |
| 2 | Right (axes at 30° and 90°) |
Notes
F5 and Ctrl+E switch to the next plane. It is saved in the drawing's current viewport, as in AutoCAD.