LinceCAD LIMITS — Limits
Sets the drawing limits and their checking.
- Command:
LIMITS· Global name:_LIMITS - Ribbon: Home › Utilities
Sets the model space limits, a rectangle that marks the working area (for instance, the sheet size), and whether drawing outside it is checked.
Usage
- Enter LIMITS.
Reset Model space limits:
- Specify the lower left corner (Enter keeps the current one).
Specify lower left corner or [ON/OFF] <…>:
- Specify the upper right corner.
Specify upper right corner <…>:
Options
- ON: turns limits checking on (LIMCHECK = 1).
- OFF: turns it off (LIMCHECK = 0).
Notes
- The limits are saved in the drawing (variables LIMMIN and LIMMAX). A new drawing has those of acadiso.dwt: from 0,0 to 420,297.
- The upper right corner must be above and to the right of the lower left one.
The upper right corner must be above and to the right of the lower left one.